The material published in this website is the copyright of James Hardie New Zealand. The use of technical manuals and CAD drawings are subject to the Conditions of Use described below. All other materials may not be copied, used or reproduced in any manner outside the uses permitted in this website, without James Hardie’s express written consent.
The James Hardie Technical Manuals reproduced on this website are intended to be read and used as a whole. Extracts should not be relied upon without reference to the complete technical manual.
IF YOU DO NOT AGREE TO THE PROVISIONS BELOW, DO NOT USE THE JAMES HARDIE CAD DRAWINGS.
Copyright in this information belongs to James Hardie New Zealand and the reproduction of this material is only authorised for purposes connected with the specification or use of James Hardie's products. This information is intended to be informative and used as a guideline in conjunction with the relevant James Hardie literature. Due to the many variables affecting different projects it cannot replace the judgement or advice of an architect, engineer or other relevant technical expert. Such experts must be consulted to determine the suitability or otherwise of the details or the necessity for further design or detailing.
CAD drawings available from the James Hardie website are solely for the purposes of detailing, specifying, using, and promoting the use of, James Hardie products and systems in conjunction with James Hardie products’ guidelines (“James Hardie Products and Systems”).
The James Hardie documentation, including CAD drawings, are protected by copyright laws. All James Hardie intellectual property rights, libraries, source codes, technical specifications and other files contained on the James Hardie CAD files remain the exclusive property of James Hardie New Zealand, and its related companies.
The User is authorised to reproduce and distribute exact copies or exact extracts of the CAD drawings for the sole purpose of detailing, specifying, using and promoting the use of James Hardie Products and Systems.
The User may not, under any circumstances use or allow the use of the CAD drawings with any product or system other than James Hardie Products and Systems.
James Hardie New Zealand may provide warranties in relation to the products and systems that are the subject of the CAD drawings. The details of such warranties are available from the Ask James Hardie™ on 0800 808 868.
All other expressed or implied warranties or liabilities in relation to the CAD drawings, and information contained in the CAD drawings are excluded, except for any warranties or liabilities which may not be modified or excluded under relevant laws. James Hardie accepts no liability arising out of the use, reproduction, or distribution of the CAD drawings.
The User will remain solely responsible to anyone receiving or using systems created by the User using the CAD drawings.